Day: 03/05/2019

Today it is all about the brush – SOTD 5/March/2019

Hi,

as you all know I am also a brush maker/vendor [Alpha Brush & Shaving Company]. I have been working on a new brush for a few weeks and now it is coming to fruition and I want to tell you all about it. More later but first the SOTD:

  • Brush – Alpha Future Chubby 3D Printed in black nylon
  • Knot – 28mm silver tip badger bulb
  • Razor – Drew Dick Damascus 1/4 hollow
  • Bowl – Van Yulay black resin
  • Soap – The Holy Black/Caswell-Massey Regents Soap

The shave was awesome, the Holy Black soap performed like a trooper and produced a nice thick, Neroli/barber [https://en.wikipedia.org/wiki/Neroli] shop scented, lather with plenty for 3 passes. The Drew Dick razor – what can I say – superb, this is my second time using this Damascus steel quarter hollow blade and boy is it sharp. I had prepped with 3P and waited ten minutes for the brush to soak, a small scoop of soap, about a teaspoon full, also blooming in my bowl.

The Razor in Detail

The razor is one I ordered from Drew Dick last year and finally got my hands on it in the summer (UK summer – JULY) as I get stuff mailed to my relatives home in the UK to save postage and pick it up when I go to visit – it is like Christmas every time… It is a Damascus 8/8″ blade with a very slight smile. It is quarter hollow and has black horn scales and as you can see it is a Damascus blade – did I mention DAMASCUS? I think it is something like 30 layers – anyway handsome or what? It is wicked sharp. I have Three Drew Dick razors now and I love them all.

The Bowl – 5″ Van Yulay Black Resin

Yes it is a distinctive Van Yulay bowl. I bought two Van Yulay bowls last year, one light blue and one black. I misplaced the black one and only found it a couple of weeks back so here it is on show for (maybe?) the first time. Anyway it looks great and works great too. I don’t know the manufacturing process but to me it seems it is pressed from some sort of resin and it pretty much renders it unbreakable although I have not done any specific drop testing, and I won’t. The texture is like honey comb and it helps whip up a great lather in no time. The “comb’ also retains a little water. One thing that it does that does not please me though is that the soap tends to get stuck down inside the pattern so I have to mash the brush to get it out and even when the shave is completed I still see some unused soap in those dimples. The bowl is big enough, grippy and I like it apart from I use too much soap. For creams it is a dream!!

The Soap – The Holy Black/Caswell-Massey Regents Soap

From THB site:

“This shaving soap is made in our classic hot-process formula and made with only the purest essential oils and absolutes that we could source. A Rosemary top note is surprisingly mild while adding a eucalyptic (sic) element to this otherwise strictly citrus fragrance. Heavy on the Neroli oil and Bitter Orange Absolute, the floral orange notes are the obvious stars of the show here. Lemon and Sweet Orange oils balance out the bitterness of the Neroli and Bergamot and lend a fresh but not cloying aspect to this simple yet elegant offering. Due to the low flash point of the essential oils used in this soap it had to be made in very small batches at low temperatures, although highly labor intensive, we think this soap is worth every minute of work that went into it.”

All those fancy words mean something to a perfumer – I just love this soap – it lathers well, is stable and slick and smells great. Nothing more to say!!

Now – THE BRUSH – Future Rubberset 400 Inspired Chubby

This brush is inspired by, among others, Rubberset 400, Merit 99-x series and the Charcoal Goods rendition of a Rubberset 400, I noticed he has done a nice rendering of a futuristic looking chubby and I wanted to make something similar. I did email him on the subject of that brush a while back and even asked for his drawings (hee hee, he did not give them..) but he did say that “You are certainly welcome to pursue a similar design as there is no way to get a design patent or anything like that on a clone of an existing product. Good luck and would like to see what you come up with.” So I fired up my CAD software (I use Autodesk Fusion360 if anyone is interested) and got to work. I made something that was not quite right looking and then lost interest after a few weeks as I was not getting the results I wanted, instead concentrating on my redesigns for the T-400 and the Chubberset and some other new brush projects. That was until two weeks ago when I was chatting on WhatsApp to a customer in Australia – no names, no pack drill. He was looking for a chubby design so I showed him a couple of designs I was working on including this one – he helped me over the course of two days make refinements to the shape, the degree of chubbiness and the curvature until it was in a place that I really liked – I mean the brush looked great on paper and the 3D renders looked superb too.

So – bottom line is I had a design that I liked and the got it 3D printed at a local professional print works. Here is the result, with a beautiful 28mm silver tipped knot fitted. It is a lather beast…

I am having a very limited number of these made, right now, in 3D nylon, Titanium and Bronze – this is not the place to sell stuff but you know where I am. I will also have an aluminium (Spelling of Aluminium), cost effective, version in the near future. The bore is 29mm, height 65mm and max width 43mm. I have the handle fully bored out to keep the weight down – in the 3D printed ones I weighted it with some coins and filled the void with hot glue – the metal versions will also be fully bored out to keep the weight down, especially with the bronze ones, and I can then weight the handles to suit and I intend to fill the void with resin.

Finally – here are some renders of my bronze version!! 10 are being made – 6 are sold already.

This slideshow requires JavaScript.